Featured Products
Rule LoPro Submersible Pump
LP900S
View Details
 

Par Max HD 4' pressure-controlled pump
Q401J-112S-3A
View Details
 

QUIET FLUSH E2 ELECTRIC TOILET Fresh water flush models, Regular bowl size, 12 volt dc
38045-4192
View Details
Toilet Waste Pumps

- "Why do I need a macerator pump?"Because a uniform slurry is more easily pumped than raw toilet waste.Whether discharge is overboard (at sea), or from a holding tank to a shore pump-out station, waste that has been macerated is pumped faster, with less risk of annoying and unpleasant blockages, and with less load on the pump.JABSCO macerator pumps have 38mm (1½") bore inlet ports for efficient handling of solids. The pump takes in raw waste, and grinds it to a consistency that can be safely discharged via 25mm (1") bore pipework.IMPORTANT NOTE:
- JABSCO macerator pumps are designed to handle normal toilet waste and easily-disintegrated toilet tissues. They will not handle high wet-strength tissues, sanitary towels, napkins, diapers, rags or hard objects.
- Pumping out the toilet waste holding tankNever the most welcome of tasks, emptying the toilet waste holding tank requires a robust reliable pump that will do the job with the minimum of fuss.If a shore pump-out station can do the job for you - no problem! But for the times when you need your own pump on board, choose a JABSCO electric or manually-operated pump designed for the purpose - simple, efficient and fully serviceable.
- No Jabsco pump should be used for petrol, solvents or any liquid with a flash point below 37oC( 98oF)
-
Showing 1 - 9 of 9
 

18590-2092
Macerator pump
£ 261.36 ex. VAT

12 volt d.c.
Compare
Details
Add To Basket

18590-2094
Macerator pump
£ 262.69 ex. VAT

24 volt d.c.
Compare
Details
Add To Basket
 
 

29270-0000
Amazon' Universal pump
£ 96.51 ex. VAT

Connections for 38mm (1½”) bore hose
Compare
Details
Add To Basket

29280-0000
Amazon' Warrior pump
£ 479.95 ex. VAT

Connections for 38mm (1½”) bore hose
Compare
Details
Add To Basket
 
 

50890-1000
Self-priming diaphragm waste pump 12 volt d.c.
£ 232.91 ex. VAT

Robust single diaphragm design
Compare
Details
Add To Basket

50890-1100
Self-priming diaphragm waste pump 24 volt d.c.
£ 232.91 ex. VAT

Robust single diaphragm design
Compare
Details
Add To Basket
 
 
53081-2061-230
Utility 80' 1½" self-priming pump 230volt/1 phase/50Hz a.c.
£ 1,164.57 ex. VAT

BSP threaded connections for on-board & dockside holding tank pump-out
Heavy Duty Model
Compare
Details
Add To Basket
CW331
Utility 80' 1½" self-priming pump 110 volt a.c.
£ 1,244.12 ex. VAT

BSP threaded connections for on-board & dockside holding tank pump-out
Compare
Details
Add To Basket
 
 

CW351
Utility 80' 1½" self-priming pump 24 volt d.c.

BSP threaded connections for on-board & dockside holding tank pump-out
Compare
Details
 
Showing 1 - 9 of 9